This is the last in the Slipper Of The Month series. You see a few years ago, I did an experiment. I designed a basic hat and named it the Chameleon Hat. Each month I modified it in keeping with the season or holiday for that month. It was a lot of fun and a very popular series, so the following year I ran a month event called the X Stitch Challenge, where I used the X stitch for a seasonal pattern each month. I thought it was time to bring back the monthly series and slippers seemed to be the perfect subject. So come back each month to see the slipper for that month and I hope you’ll join along too!
Add the Santa Slippers to your favorites on Ravelry!
Santa Slippers
This month’s Slipper Of The Month is the Santa Slipper! I made my sample with Red Heart With Love Chunky and Red Heart Fur.
This month’s pattern has the same thick, soft, cushy double sole as previous months, and the top from the toe to the ankle is worked the same too, but from the ankle up it takes on a different personality.
Santa Slippers
Scroll down for the free pattern
~or~
Purchase an ad-free PDF version on Ravelry
And don’t forget to Pin It Too
Find all my FREE crochet patterns HERE
Not a newsletter subscriber yet? What are you waiting for?
With the holidays upon us, it just seemed natural to design this month’s slipper with Santa in mind. This slipper fits like a short boot and has a fur trim around the top that is reminiscent of the fur trim on Santa’s suit!
Since I designed these for both men and women, I sized them based on length in inches. The chart below can help you figure out what US shoe size that equates to but remember, the measurement in inches is always the best choice for a good fit.
Whether you make them for your favorite man or woman, I think you’ll be pleased with them!
Santa Slippers
Materials:
- Made with #5 Bulky yarn**, I used Red Heart With Love Chunky and Red Heart Fur:
- Main Color: 280 – 480 yards
- Faux Fur: 1 ball
- Hook US I/5.50 mm (for entire slipper)
- Hook US K/6.50 mm (for fur trim only)
- Stitch markers (5)
- Tapestry Needle
** I’ve had success in using two strands of worsted weight (#4) yarn together as well, just be sure to check gauge.
Did you know I have a shop on Amazon featuring some of my favorite tools and gadgets? Click the link below to visit my shop and get your supplies, at great prices, fast and easy.
Gauge: 12 sc x 14 rows = approximately 4” – for best fit, please take the time to make a gauge swatch
Abbreviations (US Terms):
ch: chain
hdc: half double crochet
sc: single crochet
sl st: slip stitch
st(s): stitch(es)
Notes:
- Pattern written in US Standard terms.
- Weave in ends as you work.
- The ch1 at the beginning of a round does not count as a stitch.
- The stitch count is in ( ) at end of each round/row.
- Join rounds with slip stitch to first stitch of round, unless otherwise noted.
- Start each round in the join.
Sole (All Sizes) – work in Main Color:
- For the Sole, the sl st used to join rounds counts as a stitch.
Starting Chain: Ch1, (14, 17, 20, 23, 26, 29)
Round 1: Starting in 2nd ch from hook, sc (7, 9, 11, 13, 15, 17) hdc (5, 6, 7, 8, 9, 10), hdc 8 in last ch; working along opposite side, hdc (5, 6, 7, 8, 9, 10), sc (6, 8, 10, 12, 14, 16), 2sc in next st, join. (34, 40, 46, 52, 58, 64 including sl st)
Round 2: Ch1, sc (14, 17, 20, 23, 26, 29), 2sc in each of next 4 sts, sc (14, 17, 20, 23, 26, 29), 2sc in next st, 1sc in sl st, join. (40, 46, 52, 58, 64, 70 including sl st)
Round 3: Ch1, sc (17, 20, 23, 26, 29, 32), 2sc in each of next 2 sts, sc (18, 21, 24, 27, 30, 33), 2sc in next st, sc in next st, 1 sc in sl st, join. (44, 50, 56, 62, 68, 74 including sl st)
Round 4: Ch1, sc in first st, hdc (17, 20, 23, 26, 29, 32), 2hdc in each of next 2 sts, hdc (17, 20, 23, 26, 29, 32), sc in next 3 sts, 2sc in next st, sc in next 2 sts, 1 sc in sl st, join. Fasten off. (48, 54, 60, 66, 72, 78 including sl st)
Repeat for next Sole.
Join Soles and Establish Sides:
For remainder of pattern, sl st to join rounds does NOT count as a stitch.
Round 1: With wrong sides of two soles facing each other and stitches matching, join yarn in Center Back at heel. Working through both thicknesses, sl st loosely around Round 4 of Sole to join soles together, join. (48, 54, 60,66, 72, 78)
Round 2: Ch1, sc in each sl st from joining the two soles, to the end, join. (48, 54, 60, 66, 72, 78)
Round 3: Ch1, sc in each st to end, join. Fasten off. (48, 54, 60, 66, 72, 78)
Round 4: (BASE ROW): Mark center stitch at toe. With toe facing you, join Color 2 in stitch to the right of marked st, sc in each st to end, join. (48, 54, 60, 66, 72, 78)
Toe and Top:
Crochet the top of the slipper starting at the toe, and join it to the Sole section by picking up stitches on the base at the end of each row, as you work toward the ankle section.
Before continuing with the next section, you will mark several stitches to help you with where to end increases and where to start the Ankle section. You will increase one stitch each row up to the first stitch marker on either side of the center toe marker; you will continue with the same stitch count up to the second stitch marker on either side of the center toe marker.
Move stitch marker at center toe to current round. Mark the designated stitches to the right and left of center toe marker as follows (See Figure 1):
- Size 7.5”: Mark stitches 7 & 15
- Size 8.5”: Mark stitches 7 & 17
- Size 9.5”: Mark stitches 9 & 19
- Size 10.5”: Mark stitches 9 & 21
- Size 11.5”: Mark stitches 11 & 23
- Size 12.5”: Mark stitches 11 & 25
Row 1: Ch1, 2sc in same st, skip next st (the one with the marker in it), 2sc in next st. (4)
Row 2: DO NOT ch1, turn, skip first st, sc in each st of previous row, sc in next 2 sts in BASE ROW. (5)
Follow separate instructions for your size
For 7.5 size
Rows 3 to 7: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (10 after last repeat)
Rows 8 to 15: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (10)
Skip to Ankle
For 8.5 size
Rows 3 to 7: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (10 after last repeat)
Rows 8 to 17: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (10)
Skip to Ankle
For 9.5 size
Rows 3 to 9: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (12 after last repeat)
Rows 10 to 19: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (12)
Skip to Ankle
For 10.5” size
Rows 3 to 9: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (12 after last repeat)
Rows 10 to 21: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (12)
Skip to Ankle
For 11.5” size
Rows 3 to 11: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (14 after last repeat)
Rows 12 to 23: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (14)
Skip to Ankle
For 12.5” size
Rows 3 to 11: Repeat Row 2. This will increase stitch count by 1 for each row (See Figure 2). (14 after last repeat)
Rows 12 to 25: DO NOT ch1, turn, skip first 2 sts, sc in each st of the previous row, sc in next 2 sts in the BASE ROW (See Figure 3). (14)
Ankle :
Worked in a spiral (do not join the rounds), it may be helpful to mark the first stitch of each round to keep count.
Round 1: Working in stitches around Heel and Top, sc in each st to end, be sure to work a stitch in the space before the 1st st of the top (See Figure 4). (28, 30, 34, 36, 40, 42)
Rounds 2 to 11: Ch1, hdc in each st to end. (28, 30, 34, 36, 40, 42)
Round 12: Ch1, hdc (26, 28, 32, 34, 38, 40), sc in next st, sl st in last st. Fasten off.
Round 13: Join Faux Fur in any stitch, ch1, *sc 3, skip 1*, repeat between * to end, join to first st. Note: For some sizes the last repeat may not be a full repeat. Fasten off.
Tie (optional)
With Faux Fur, ch3, 2sc in 2nd ch from hook and in next ch, join to first st. Fasten off.
Join Main Color, sc 25. Fasten off.
Join Faux Fur, ch3, 2sc in 2nd ch from hook and in next ch, join to first st. Fasten off.
Trim fur to give pompom a more rounded appearance.
Fold chain in half and sew into place on front of slipper.
Please note: The photos below may not reflect the stitch count for your specific size or the number of colors used. They are offered for guidance as the process is the same regardless of size or color combination.
Pin The Santa Slippers For Later!
I can't wait to see your finished projects,
so feel free to share them on my Facebook page!
Follow me on…
Sign up for my newsletter and get free patterns, giveaways and
other fun stuff delivered directly to your mailbox!
****************************************************************
I’m always happy to help you with questions regarding my patterns. Send me a message and I'll get back to you as soon as possible. Please feel free to sell finished items from my patterns. Pattern credit is not required, but is always appreciated.
Copyright © 2023 Pattern Paradise. All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher.
