My Blog Anniversary Celebration continues with a new free hat pattern!
The September Chameleon Hat takes to the skies in an aviator style ready for lift off in pursuit of new adventures!
Friendly Skies Hat
For this version of the hat, I converted the brim into an aviator faux flap and added long earflaps and fur trim. The contrasting band gives the illusion of a goggle band too. Try it in many different colors and button combinations for many different looks! ~
~ Don’t lose it, add It To Your Ravelry Queue Or Favorites ~
~ And don’t forget to Pin It Too ~
* Purchase an ad-free PDF of this pattern on Craftsy or Ravelry *
Find all my FREE crochet patterns HERE
**************************************************************************************************
Materials:
- Worsted weight yarn such as Red Heart Soft, in 2 colors, approximately 200-500 yards depending upon size.
- Fun Fur for trim
- 3/4″ buttons – 2
Gauge:
Hook US G/4.00 mm 9 hdc x 6 rounds = 2″
Hook US H/5.00 mm 8 hdc x 5 rounds = 2″
Abbreviations:
beg = beginning
ch(s) = chain(s)
dc = double crochet
hdc = half double crochet
hdc2tog = half double crochet 2 stitches together
sc = single crochet
Rnd = Round
sl st = slip stitch
st(s) = stitches)
Special Stitch: Shell = 5 dc in same stitch
Notes:
- Pay attention to color changes, make them in the last pull through in last st of each row.
- Fasten off at color change.
- Weave ends as you work.
- Ch1 at beginning of round DOES NOT count as a stitch.
- Join each round with slip stitch to beginning stitch.
- Numbers in ( ) at end of round/row represent the number of stitches in that round/row.
- Work instructions in [ ] as designated. Example: [sc, dc, sc] 3 times means repeat everything in the [ ] 3 times.
- When a number precedes a stitch you will complete that number of stitches in the next stitch. Example: 3hdc means make 3 hdc in the next stitch.
**************************
Newborn–3 months/Approximately 12 -14” circumference x 5″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make a Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc)
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts, 2hdc in next st] around, join. Your circle should be approximately 4 ¼” in diameter. (48 hdc)
Rnds 7 – 9: Ch1, hdc in each st around, join. (48 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color2, Ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] repeat around, join.
(8 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 9 sts. (10 hdc)
Rows 2 to 4: Ch1, turn, hdc in same st and each st to end. (10 hdc)
Rows 5 to 6: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (6 hdc after last repeat)
Second Flap:
Row 1: Skip 14 sts from end of First Flap, join in next st, Repeat Rows 1 to 6 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (14 hdc)
Rows 2 to 6: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (14 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**********
6-12 months/Approximately 15-16” circumference x 6″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make a Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc)
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. (48 hdc)
Rnd 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. Your circle should be approximately 5” in diameter. (56 hdc)
Rnds 8 -11: Ch1, hdc in each st around, join. (56 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color 2, ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 8 shells made, skip 2, sc in next, skip 1, Shell in next, skip 1, sc in next, skip 1, Shell in next, skip last, join. (10 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 9 sts. (10 hdc)
Rows 2 to 5: Ch1, turn, hdc in same st and each st to end. (10 hdc)
Rows 6 to 7: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (6 hdc after last repeat)
Second Flap:
Row 1: Skip 18 sts from end of First Flap, join in next st, Repeat Rows 1 to 7 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (18 hdc)
Rows 2 to 7: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (18 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**********
12-18 months/Approximately 17-18” circumference x 7″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc)
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc)
Rnd 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc)
Rnd 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. Your circle should be approximately 5 ½” in diameter. (64 hdc)
Rnds 9 -13: Ch1, hdc in each st around, join. (64 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color 2, ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 10 shells made, skip1, sc, skip 1, Shell in next, skip last 2, join. (11 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 9 sts. (10 hdc)
Rows 2 to 5: Ch1, turn, hdc in same st and each st to end. (10 hdc)
Rows 6 to 7: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (6 hdc after last repeat)
Second Flap:
Row 1: Skip 22 sts from end of First Flap, join in next st, Repeat Rows 1 to 7 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (22 hdc)
Rows 2 to 7: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (22 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**********
Toddler /Approximately 19-20” circumference x 7″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make a Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop.
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc)
Rnd 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc)
Rnd 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. (64 hdc)
Rnd 9: Ch1, hdc in same st, hdc in next 6 sts, 2hdc in next st, [hdc in next 7 sts , 2hdc in next st] around, join. Your circle should be approximately 6” in diameter. (72 hdc)
Rounds 10-13: Ch1, hdc in each st around, join. (72 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color 2, ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] repeat around, join. (12 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 11 sts. (12 hdc)
Rows 2 to 6: Ch1, turn, hdc in same st and each st to end. (12 hdc)
Rows 7 to 8: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (8 hdc after last repeat)
Second Flap:
Row 1: Skip 24 sts from end of First Flap, join in next st, Repeat Rows 1 to 8 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (24 hdc)
Rows 2 to 8: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (24 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**********
Kids/Approximately 19-20” circumference x 8″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make a Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop.
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc)
Rnd 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc)
Rnd 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. (64 hdc)
Rnd 9: Ch1, hdc in same st, hdc in next 6 sts, 2hdc in next st, [hdc in next 7 sts , 2hdc in next st] around, join. Your circle should be approximately 6” in diameter. (72 hdc)
Rnds 10-15: Ch1, hdc in each st around, join. (72 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color 2, ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] repeat around, join. (12 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 11 sts. (12 hdc)
Rows 2 to 7: Ch1, turn, hdc in same st and each st to end. (12 hdc)
Rows 8 to 9: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (8 hdc after last repeat)
Second Flap:
Row 1: Skip 24 sts from end of First Flap, join in next st, Repeat Rows 1 to 9 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (24 hdc)
Rows 2 to 9: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (24 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**********
Adult/Approximately 22-23” circumference x 9″ Long
Crown – Use Hook US G (4.0 mm)
Rnd 1: With Main Color, make a Magic Circle, ch1, work 8 hdc in center, join. Pull tail tightly to close loop. (8 hdc)
Rnd 2: Ch1, 2hdc in each st around, join. (16 hdc)
Rnd 3: Ch1, hdc in same st, 2hdc in next st, [hdc in next st, 2hdc in next st] around, join. (24 hdc)
Rnd 4: Ch1, hdc in same st, hdc in next st, 2hdc in next st, [hdc in next 2 sts , 2hdc in next st] around, join. (32 hdc)
Rnd 5: Ch1, hdc in same st, hdc in next 2 sts, 2hdc in next st, [hdc in next 3 sts , 2hdc in next st] around, join. (40 hdc)
Rnd 6: Ch1, hdc in same st, hdc in next 3 sts, 2hdc in next st, [hdc in next 4 sts , 2hdc in next st] around, join. Your circle should be approximately 4 ½” in diameter. (48 hdc)
Rnd 7: Ch1, hdc in same st, hdc in next 4 sts, 2hdc in next st, [hdc in next 5 sts , 2hdc in next st] around, join. (56 hdc)
Rnd 8: Ch1, hdc in same st, hdc in next 5 sts, 2hdc in next st, [hdc in next 6 sts , 2hdc in next st] around, join. (64 hdc)
Rnd 9: Ch1, hdc in same st, hdc in next 6 sts, 2hdc in next st, [hdc in next 7 sts , 2hdc in next st] around, join. Your circle should be approximately 6” in diameter. (72 hdc)
Rnd 10: Ch1, hdc in same st, hdc in next 7 sts, 2hdc in next st, [hdc in next 8 sts , 2hdc in next st] around, join. Your circle should be approximately 6 3/4″ in diameter. (80 hdc)
Rnds 11-17: Ch1, hdc in each st around, join. (80 hdc)
Band – Use Hook US H (5.0 mm)
Rnd 1: With Color 2, ch1, starting in same st, [sc, skip 2, Shell in next st, skip 2] until you have 12 shells made, sc in next, skip 1, Shell in next, skip 1, sc in next, skip 1, Shell in next, skip last, join. (14 Shells)
Rnd 2 and 3 : Ch3 (counts as dc), [sc in center of next Shell, Shell in next sc] repeat around, ending with 4 dc in beg st, join to top of beg ch3, sl st into next sc.
Rnd 4: Join Main Color, ch2 (counts as hdc), hdc in next st, [sc next 3 sts, hdc next 3 sts] around to end (last repeat ends with hdc), join.
Ear Flaps – Use Hook US G (4.0 mm)
First Flap:
Row 1: Ch1, hdc in same st and next 13 sts. (14 hdc)
Rows 2 to 8: Ch1, turn, hdc in same st and each st to end. (14 hdc)
Rows 9 to 10: Ch1, turn, hdc in same st, hdc2tog, hdc in each st to last 3 sts, hdc2tog, hdc in last st. Fasten off. (10 hdc after last repeat)
Second Flap:
Row 1: Skip 26 sts from end of First Flap, join in next st, Repeat Rows 1 to 10 of First Flap.
Visor – Use Hook US G (4.0 mm)
You will work the visor in the stitches between the two ear flaps.
Row 1: Join Color 2 in first st following First Flap, ch1, hdc in same st until the next ear flap. (26 hdc)
Rows 2 to 10: Ch1, turn, hdc in same st and each remaining st to end. Fasten off after last repeat. (26 hdc)
Border: With Fun Fur, join in any stitch in center back of hat, ch1, sc in each st around, working around ear flaps and visor. Fasten off. Sew buttons in place to hold front visor in place.
**************************************************************************************************
Browse through my FREE PATTERNS for other versions of the Chameleon Hat too!
I can't wait to see your finished projects,
so feel free to share them on my Facebook page!
Follow me on…
Sign up for my newsletter and get free patterns, giveaways and
other fun stuff delivered directly to your mailbox!
****************************************************************
I’m always happy to help you with questions regarding my patterns. Send me a message and I'll get back to you as soon as possible. Please feel free to sell finished items from my patterns. Pattern credit is not required, but is always appreciated.
Copyright © 2023 Pattern Paradise. All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher.
Love this pattern. Thank you for the free share. I enjoy the comments also, as sometimes it clears up, or gives me a heads up, on something to double check. When printing these patterns, to save paper, all one needs to do is set it up with the printer, what pages to print. If one doesn’t want the adds, just cut and paste to a word pad program, the part you want. Be sure to add the name and web address to your paper so you can give credit, or look the pattern back up, if needed. Thanks again for being so generous with your pattern writing gift.
Thank you so much! I enjoyed your note and sentiment 🙂
Can’t wait to try this one! Very Cute
thank you so much for this pattern! it’s really clear and easy. I don’t really speak english and I understand it… Your blog is cool!
Thank you!
Which is color #1 and which is the main color?
In my sample the Main Color #1 is the Grey, #2 is Navy.
I just love this hat, thanks so much for your generosity I can’t wait to try this x
Awesome hat, I’m working on this as a gift for my dad for Christmas. I have made it to the ear flaps and I admit I’m confused. Where would I want to start the flaps? Maybe I’m missing it. If you could let me know I would appreciate it.
When you finish the last round of the hat, do not fasten off, instead continue with the directions for the first earflap. Once that one is done, fasten off, skip the designated # of stitches to get to the other side of the head and then start over with the earflap instructions. Hope that helps.
please make your patterns printable. no one wants to waste the ink printing all the comments.
iin fact take comments right out. no one reads them anyway
Thank you for your note Bette. My FREE patterns are printable, however, should you prefer an ad free downloaded version it is available for $1. Please message me with which pattern you are interested in.
I am making the hat and can not find the shell instructions.
Please help, I know I will feel dumb after you tell me.
LOL Patty, I know the feeling. The shell is 5 double crochets in the same stitch and is defined in the abbreviations section next to the sizing chart. Hope that helps!
Thanks so much.
Ok I read that I thought. Oh my gosh. Head hitting wall. 🙂
Hi! I am having trouble understanding how to crochet the gauge swatch. Am I supposed to crochet 6 rounds of 9 hdc? Or do I start the pattern and after 6 rounds then I measure?
Thanks so much!
I would work up the gauge swatch first so you can make any adjustments before you start your project 🙂
Is there an error on the adult ear flap, if you start with 14 sts and reduce by 4 that leaves10 not 8. Also on the band on row 4 should you have 80 hdc ?
You are correct, the ear flap should end with 10 stitches not 8, I’ve updated the pattern accordingly. As for Round 4 of the band, no it should actually be 84 as I force the # of shells in the first row of the band.
love this pattern. I would like to make a scarf to match . What would be an apportate Mesurements for a scarf to fit a one year old with fur edges?
Thanks very much
Oh that sounds super cute! I’ve never made a scarf for a one year old, but I would probably guess around 30 – 36″. You might want to look on the internet to see what common sizes they are sold in. Please share your picture when you are done!
Thank you. I will. I am having problems understanding the band instructions. Not sure why . Please tell me how to do the shell. I am doing the hat for an toddler and it tells me I should have 12 shells. Since I am not sure what I am doing I sc chain1 skip 2 but I know this isnt right and the shell count would be totally off.
Thanks
Never mind duh. Just seen the instructions on the sell
Cant wait to start making all of these hats. I crochet for charity
I am making your gorgeous hat and wonder if the crochet hook I am using is too small. I am using the G(4.0) hook as advised but the actual product seems very small. Is there something I am doing wrong that I am not aware of? Thank you!
Hi Nancy, everyone crochets slightly differently. I would suggest doing a gauge swatch. You may have to go up a hook size to achieve the gauge.
Thank you. Will try this. Adorable hat but seems small.
So cute !!!
Anna